What are good trucks for an 8.0 deck?
Skate Truck Size to Skate Deck Size Guide by Brand
| Size | Actual Axle Length | Recommended Deck Size |
|---|---|---|
| 5 | 7.625″ | 7.4″ – 7.75″ |
| 5.25 | 7.875″ | 7.75″ – 8.0″ |
| 5.5 | 8.125″ | 8.0″ – 8.25″ |
| 5.75 | 8.375″ | 8.25″-8.5″ |
•
May 2, 2017
Should my trucks be the same size as my deck?
The trucks should always fit the width of your Skateboard. It’s important that they’re not much wider than the deck because otherwise, the centre of gravity will shift to the side of the deck. This may have an effect on flip tricks and can affect the general boardfeel.
What size wheels should I get for a 8.0 deck?
FIND THE RIGHT SIZE SKATE PARTS
| Deck Size | truck Size | Wheel Size |
|---|---|---|
| 8.0 | 7.75 – 8.25 Axles | 50 – 54 mm |
| 8.125 | 8.0 – 8.25 AXLES | 50 – 54 mm |
| 8.25 | 8.0 – 8.5 axles | 52 – 55 mm |
| 8.375 | 8.25 – 8.5 axles | 52 – 55 mm |
Will a 7.75 truck fit an 8.0 deck?
Yes! You could ride 8-inch trucks on a 7.75 inch deck. Normally, people ride trucks which are 0.25 inches narrower than their deck. This means that 7.75 inch trucks would be a good fit for an 8 inch deck.
Will 5.0 trucks fit a 8.0 deck?
When Buying a new set of skateboard trucks you first need to know the deck width you will be using them with. For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75″ deck matches a 5.0″ truck, an 8.0″ deck matches a 5.25″ truck.
What are 149 trucks?
Independent 149 size trucks are designed to fit skateboards from 8.5in to 8.65in wide.
- Independent Stage 11 Trucks.
- Updated Geometry.
- Better grind clearance.
- 55mm Tall.
- Improved “No Hang Up Yolk”
What size trucks fit a 7.5 deck?
Size Guide – Skateboard Trucks
| Skateboard Truck Size Guide | ||
|---|---|---|
| Deck Size | Hanger Width | Ace |
| 7.5 to 7.75″ | 127mm / 5″ | 22 |
| 7.75 to 8.25″ | 137mm / 5.25″ | 33 |
| 8.25 to 8.75″ | 149mm / 6″ | 44 |
What size board does 149 trucks fit?
Independent Skateboard Truck Size Chart
| Truck Size | Axle Width (in) | Skateboard Deck Width (in) |
|---|---|---|
| 149 | 8.5 | 8.375 – 8.6 |
| 159 | 8.75 | 8.6 – 9 |
| 169 | 9.125 | 9 – 9.5 |
| 215 | 10 | 9.5 – 10.5 |
What size wheels should I get for a 7.5 deck?
Skateboard Truck & Wheel Size Chart
| Truck Size | ||
|---|---|---|
| 7.5″ | 4.75 | 48-54mm |
| 7.63″ | 4.75/5.0 | 50-54mm |
| 7.75″ | 5.0 | 52-56mm |
| 7.88″ | 5.0/5.25 | 52-56mm |
What happens if your trucks are too small?
What Happens When Your Trucks Are Too Narrow. When you‘re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.
How good are CCS trucks?
Trucks are ok but can’t take much abuse. They will break after a few months of grinding and hard impacts. The wheels are likely to flat spot when you progress to powerslides. Very soft bushings, not for large or people over 200LBS/90kg but it also depends on your preference.
How good are Thundertrucks?
Thunders grind great but they wear down faster, Venture is in the middle indys wear down the slowest. Indys are great for chunky ledges because of all the metal on the truck. At a certain point, grooves will start to form which helps you to lock-in you grind.
What size deck should I get?
We recommend starting with a skateboard deck width that is proportional to your shoe size. If you wear men’s size 6.5 to 9, start out with a deck width of 7.5 to 8.0 inches. If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches.
How tight should trucks be for beginners?
Your trucks should be loose enough that you don’t need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider’s preference. That being said, they should be tight enough that the kingpin won’t fall out and loose enough that the bushings don’t burst.
Is it better to have tight or loose trucks?
The faster you intend on riding, the tighter your trucks should be. Tight trucks provide stability at higher speeds, reducing the likelihood of catching the dreaded speed wobbles. If you’re considering riding downhill, or if a vert ramp session is in your future, consider tightening your trucks for safety’s sake.
What size deck does Tony Hawk Ride?
Among the legends of the discipline, Tony Hawk rides surprisingly thin decks nowadays at only 8.5”, but he used to have 9.0” pro decks released in the past.
What is an average deck size?
between 300 and 400 square feet
The average deck size is between 300 and 400 square feet. Generally, a deck should be wider than it is deep, with the longer dimension running along the house. With large decks, consider making them multi-level designs.
How big is a 8.0 skateboard?
Skateboard Deck Size Chart
| Deck Width (in) | Suggested Truck Axle Width (in) |
|---|---|
| 7.6 – 8.0 | 7.75 / 7.8 |
| 7.75 – 8.25 | 8.0 |
| 7.875 – 8.375 | 8.125 |
| 8.0 – 8.5 | 8.25 |
What size deck does Yuto Horigome ride?
8.0″ x 31.6″
This is a rider stock deck from Blind, originally produced for use by Yuto Horigome. Yuto Horigome rides a Impact Light deck that measures 8.0″ x 31.6″ with a Medium Concave shape and his deck features the Blind OG Logo Black graphic.
What size deck does nyjah skate?
Disorder Skateboards makes decks in four different sizes: 8”, 8.125”, 8.25” and 8.5”. Given the technical nature of his riding, it’s no surprise Huston comes down on the narrower end of the spectrum, riding an 8.125”, which he prefers for the balance between being light but also substantial enough for riding big rails.
What size deck does tyshawn ride?
This professional quality Krooked Skateboards Tyshawn Guest Skateboard Deck measures 8.25″ wide x 32.25″ long and is ideal for every skill level, from beginner to pro. Krooked Skateboards Tyshawn Guest Skateboard Deck is a totally versatile skateboard deck that’s perfect for street, pool, park and vert.
What trucks does Rodney Mullen use?
Rodney Mullen — Tensor Trucks.
How old is Tony Hawk?
53 years (May 12, 1968)
Tony Hawk/Age
What is a standard size skateboard?
around 31″ – 33″ long
Most skate decks are right around 31″ – 33″ long. Decks with a length of 33″ and longer will also generally have a width of 8.5″ or wider. Tired makes decks with longer wheelbases and would be a good place to start shopping.