Types of stage lighting

There are four main types of lighting that are used in a retail setting: Ambient, Task, Accent and Decorative.

Photography is “writing with light.” So, let’s build our conversation about lighting on five fundamental characteristics of light: Direction, Intensity, Color, Contrast, and Hardness.

Cyc lights throw a sheet of light. Traditionally with a “J” shaped reflector, they are able to sit on the floor or hang fairly close to the backdrop and throw an even sheet of light up and down. The bottom of the “J” is for the short throw and the top part is for the longer throw.

Cyclorama lighting is used either from the ground (Ground Cycs) or from fly pipes (Sky Cycs) and for better uniformity, both types may be used.

To elaborate further, a cyc is any type of walled background incorporating one or more curved surfaces that are used to create a background with no perceptible beginning or end. In a cyc studio, all corners are seamless. This is referred to within our industry as an “infinity background”.

One of the simplest ways to automate lights in your house is to just plug lamps in each room into a smart plug. Then use your phone to control all of those lamps from a single app. The following are the most popular smart plugs you can use to do this. TP-Link Kasa ($23): Works with Wi-Fi, and no hub required.

1. Best Whole Home Automation System—Logitech. The very highly-rated Logitech Harmony Elite remote control home automation system with hub and app can control up to 15 synched devices in your home.

A smart home is a home that is equipped with technology to remotely control and automate household systems like lighting, doors, thermostats, entertainment systems, security alarms, surveillance cameras and other connected appliances. But it’s more than just remote controls.

Smart lighting is a lighting technology designed for energy efficiency, convenience and security. This may include high efficiency fixtures and automated controls that make adjustments based on conditions such as occupancy or daylight availability. It includes task lighting, accent lighting, and general lighting.

Sensor technologies

Ambient lighting sensors, proximity sensors and even photodiodes can be used for smart lighting. Ambient light sensors can be used to switch main lights off when there is sufficient illumination available, but it is important to have a sensor that is aligned with the sensitivity of the human eye.

The answer is yes, You can control a smart bulb manually with a normal wall switch as in a conventional home or remotely though a smartphone.

You need a Bluetooth enabled smart devices such as your phone or tablet. To control your smart bulb without WiFi, you simply turn on the light switch, open the Bluetooth app of the bulb, and the bulb automatically “found.” You then press ‘add device,’ ‘connect’ or ‘pair’ on the app.

Smart bulbs are not a fire hazard, by and large, but they can be if they are not utilized properly. The advantage of LED smart bulbs is that their energy is directed more at lighting than producing heat and therefore their chances of malfunctioning due to heat are very low.

As we mentioned above, smart bulbs are in a class of appliances that use electricity in standby mode: vampire devices. This means that smart bulbs use electricity even when they’re off. Well, in order to be turned on with your phone or another device, the bulb still needs to be connected to the internet or Bluetooth.

You’ll save money over time.

Besides saving energy and money, smart bulbs also last longer. Incandescent or halogen bulbs last around a year, while LED lights last 10 years on average. While they tend to cost more upfront, you’ll end up replacing them far less than you would incandescent bulbs.

Some Smart Lights Require a Special Hub to Operate

A feature of smart lights (or at least, some of them, such as Philips Hue) that contribute a significant amount to their cost is that they may come with a requirement for a special hub in order to operate.