RESPONSE TIME IMPROVEMENT ON ONE TIME PASSWORD (OTP) TECHNIQUE TO PREVENT REPLAY ATTACK IN A RADIUS ENVIRONMENT.

CHAPTER ONE

INTRODUCTION

1.1 BACKGROUND

The entire Ahmadu Bello University Campus Network Infrastructure, runs on fiber optic

technology for transmission and is built based on the Cisco standard hierarchical design standard

for campus networks (core, distribution and access levels) providing high speed and redundancy.

The network is built on Cisco technology using high end devices which include Cisco Catalyst

6500 series as the core switch, 4500, 3700 and 3560 series switches as distribution switches and

2960 series and gigabit small business series switches as access switches. This setup guarantees

gigabit transmission to every host on the network. The network covers all the campuses of ABU

Zaria which include Samaru, Kongo, Shika and NAPRI all connected with over 60km of optical

fiber cable.

The core network as in Figure1.1 is built on the Virtual Switching System technology for high

capacity using ether channel technology, whereby so many fiber ports are bundled together for

more bandwidth capacity on a link, all the servers are part of the core network including the

authentication server. Distribution is built on Layer 3 switches the Cisco 3750G all the distribution

points are connected back to the core network through a fiber link, with static addressing of point

to point nodes. Dynamic routing protocol is enabled running Open Shortest Path First (OSPF),

with each distribution switch used as the OSPF Area Border Router (ABR) with separate areas.

The distributions also host the virtual local area network VLAN of each access layer switches.

The access layer which comprises mainly of Small Business Series switches and 2960 series

switches is built on Layer 2 switching technology. Access layer devices have access to Dynamic

Host Configuration Protocol (DHCP) services from the distribution switch to which the Access

switch is connected.

You May Also Like