What should I use to clean vinyl siding?
The best vinyl siding cleaning solution uses gentle products such as dish soap and water, or vinegar and water. Or, you can purchase a commercial vinyl siding cleaner to do the job. Apply the solution and clean the siding using a soft-bristled brush or microfiber cloth, then rinse off with a spray hose.
Is it OK to power wash vinyl siding?
The answer is: YES, pressure washing absolutely can damage vinyl siding if done incorrectly. Pressure washing involves water being pushed through a small hose and wand after being compressed. This creates a very powerful blast of water that can be used to scrub away any kind of dirt or debris.
How do you clean vinyl siding without a pressure washer?
Using a garden hose, spray only the section of siding that you’re working on with water. Spray using a downward motion to avoid forcing water underneath the siding, where it could cause damage and rot. Using a scrub brush and the TSP/water cleaner, scrub the siding to remove the grime and dirt.
Does vinyl siding need to be cleaned?
Unlike other exterior cladding, vinyl siding only requires periodic cleaning with mild soap and water from a garden hose. Learn more tips and tricks for how to clean vinyl siding below.
How do you make vinyl siding look new?
Does bleach damage vinyl siding?
Will bleach hurt vinyl siding? Although vinyl siding can also be cleaned with detergents, Clorox is much more effective for removing stubborn baked-on dirt, soot, stains, mold and mildew. Clorox bleach will not harm vinyl siding as long as it is properly diluted and thoroughly rinsed from the surface.