How do I reset my camera?
Using a RESET button
- Locate the RESET button on the camera. NOTE:
- Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
- After 2-3 seconds has elapsed, release the RESET button.
- After the camera reboots, the time and date settings menu will be displayed.
How do I connect my Zmodo to a new WiFi?
Open the Add Device “+” menu on the upper right-hand corner and select the ‘Zink’ setup method. If you do not have a Beam already, select the ‘Normal’ setup option. 4) Connect to your phone to your WiFi device’s wireless signal. Your will be prompted to connect to your device’s WiFi signal.
How do I connect my Zmodo camera?
How do I reset my wireless camera?
Switch off the network camera by disconnecting the power adapter. Press and hold the reset button with a straightened paperclip while reconnecting the power. Keep the reset button pressed until the status indicator blinks. Release the reset button.
How do I reset my blink camera to factory settings?
How to reset Blink Module?
- Press and hold the reset button located at the side of the module for 10-15 seconds.
- Hold it until the light turns red.
- You will see the solid green and blue light when the reset is complete.
Where is reset button on Blink module?
The reset button is located on the right-hand side of the Sync Module next to the USB port.
Is there a reset button on Blink cameras?
The Blink Mini has a reset button on the bottom side of the camera, which may be necessary to use when you add it to a new or existing Blink system. When a Mini displays a solid red light, a long press of the reset button (more than 5 seconds) will reset it and resolve setup issues.
Where is reset button on Blink Sync module?
The Sync Module has a physical reset button located next to the USB port on the side of the device (pictured below). This button should only be used to put your Sync Module into setup mode. Pressing this button will bring your system offline until you reconfigure your Sync Module.