How do you reset error on LCI electronic leveling?
you must’ve let your batteries get too low, it automatically locks the panel when the house batteries get low. hold the enter and the button below it (can’t remember what it’s called) at the same time..that should clear it. Hit enter and retract at the same time.
How do you clear the error code on a Lippert leveling system?
We have heard of this issue before on the Lippert Ground Control systems # LC358590. Here is the recommended procedure for clearing the error code: Extend all jacks at least 6 inches. Then press and hold the RETRACT button until the jacks begin retracting. All of the jacks should fully retract and clear the error.
How do I reset my Lippert control?
Doing a reset by holding the black button, or a hard reset through the small hole in front normally brings it back to normal. A couple of times I have had to stop power to the unit and turn power on again.
How do I reset my LCI panel?
There is a way to reset the panel by pushing a series of the buttons similar to re-calibrating the auto level, as I recall. Your best chance is probably to call LCI at (574) 537-8900 and get them to tell you.