How do you read a Neptune water meter?
To read a Neptune E-Coder water meter:
Shine a flashlight on the photoelectric eye (look for the flashlight symbol) to activate the screen. The screen eventually will begin to flash between “Reading” and “Rate”.
How do you read a Neptune meter in gallons?
Once you have both readings you will subtract the two readings to get the number of gallons (or cubic feet) used! If the meter reads in Cubic Feet, simply multiply the difference by 7.48 to convert to gallons.
How do I read my Neptune water meter e coder?
To read your Neptune E-Coder® register, expose the solar panel to sunlight or shine a bright light (i.e. flashlight or cell phone flashlight), and the display will activate.
How do I read my water meter reading?
To determine the amount of water used since your last reading, take the current meter read and subtract the previous meter read (from your water bill), which will give you the number of cubic meter/s used. For example, if your previous read was 001,200. and your new read is 001,250.
What is a Neptune R900?
R900® Gateway Neptune’s easy-to-use, flexible R900® System gateway fixed network data collector gathers metering data as well as daily leak, reverse flow, and days of no flow alerts from all E-CODER®-equipped meters.
What are the dials on a water meter?
The large sweep hand on the dial measures water use in gallons or cubic feet. One gallon or one cubic foot of water passes through the water meter as the sweep hand moves from one number to the next (e.g., 0 to 1). A complete rotation equals 10 gallons or 10 cubic feet depending on the unit measured.
What is the unit of water meter reading?
kilolitres
The black numbers on your water meter represent kilolitres (kL). One kilolitre (kL) equals 1000 litres (L). This is the unit of measurement our meter readers record as your meter reading.
How do you read the Neptune ProCoder register?
To read the Neptune ProCoder register, look at the mechanical wheel bank first. The wheel bank contains 8 digits for a high resolution direct read. Unit places will depend on the size of the meter and units of measure.
What is a water meter Miu?
MIU deployed to measure total volume of water supplied and received from water treatment plants. Readings recorded can be analyzed to detect leaks in main pipes.
How do I turn off my Neptune Water meter?
How do you read a Neptune meter in cubic feet?
Reading your water meter is like reading the odometer of your car. Read all of the numbers from left to right that appear under the words “Cubic Feet.” The first digit on the right represents one cubic foot. The second from the right represents 10 cubic feet.
How do you read a 8 digit water meter?
What is a Neptune ProCoder?
ProCoder™ is Neptune’s newest high-resolution solid state absolute encoder register. In addition to all the features of a basic encoder register, when the ProCoder is connected to an R900® or R450™ RF MIU, it provides value-added PLUS features – leak, tamper, and reverse flow detection.
How do you read a 9 digit water meter?
Digital meters: The registers have 9 digits on the face. These last five digits on the right side measure from 1/1000 cubic feet to 10 cubic feet. The next series of numbers to the left is the number of billing units that have passed through the meter. Those are the numbers used to calculate your usage.
How do you calculate water units?
Basic units of water measurement
- Cubic feet per second (cfs): * 1 cubic foot = 7.4805 gallons. * 1 cubic foot per second = 7.4805 gallons flowing by a particular point in 1 second. …
- Acre-foot (af): * 1 acre = 43,560 square feet. …
- Other conversions: * 1 US gallon = 0.1337 cubic feet = 3.79 liters.
How is water measured in a meter?
A water meter is measures the quantity (volume) of water that passes through a pipe or other outlet. Typically, meters use a standard unit of measure for volume, such as cubic feet or gallons. Your meter works like a car odometer, recording the cumulative amount of water that has passed through the meter.