What kind of wood is used for board and batten?
Cedar is a common choice for exterior board and batten siding, but other acceptable wood species include Cyprus, redwood, locust, white oak, and hemlock.
How do you DIY board and batten?
- Remove existing baseboards from wall.
- Install new baseboard.
- Attach middle board to wall.
- Determine batten (vertical board) spacing.
- Attach battens (vertical boards) to the wall.
- Add the top board to board and batten wall.
- Fill holes, caulk, and paint DIY board and batten.
How do you attach board and batten to the wall?
How do you space out board and batten?
Typically, batten are spaced anywhere from 12” to 24” apart. I think it looks best to space them as close to 18” as possible, but that’s just a personal preference. Our wall is 164” wide, so we used 8 batten (for a total of 7 spaces) with a distance of 19.42 inches between each batten.
Does board and batten need to be caulked?
Board and batten is a traditional siding that works well if you’re on a budget and live in rustic surroundings. You’ll probably finish the siding, so the caulk should be paintable. It should also stay flexible enough to compensate for wood movements.
What size boards do you use for board and batten?
Siding should be nailed to horizontal blocking lines or to furring strips. Rough sawn, unseasoned boards or boards surfaced on one side and two edges (S1S2E) are commonly used for board-and-batten siding. Sizes are from 1 x 2 in. to 1 x 12 in.
Is board and batten going out of style?
I know, I know….”Board and batten is timeless…it will never go out of style.” Bull… hardwoods are timeless…but yet 40 years ago people covered them with wall to wall carpet.
Does board and batten make a room look bigger?
This board and batten treatment is easy to do and does wonders for giving a room architectural interest and the feeling of a larger space.
How high should board and batten be in dining?
I always followed the rule of thumb that it should be standard chair rail height in a kitchen or dining room. (36-40″) give or take an inch. If this is for living room or bedroom, it is very common now days to go up to 5 to 6 foot depending on the ceiling height.
How do you find the height of a board and batten?
Take a few minutes to roughly draw a box (your room) and write down your wall width. Don’t forget to double the widths since you’ll need a top and bottom molding. Then, figure out your estimated height. Decide how many rails you’ll want and multiply it by the rail length dimension.
How thick should board and batten be?
Bottom boards: 4-1/2” Top Boards: 3-1/2” Battens: 2-1/2”
How do you board and batten a dining room?
What kind of paint do you use on board and batten?
Paint – We used Sherwin Williams PURE WHITE 7005 to paint the boards and battens (either eggshell or satin finish—can’t remember now!) You can paint everything the same color, or paint the boards a contrasting shade. SW 7005 is the same color we’ve used throughout our house for walls, trim, and the exterior trim.