How to clean candle wax

Dip a cotton pad in mineral oil, massage oil, or olive oil. Warmer oil works better than cold oil. Hold the soaked pad on the wax residue until it’s saturated — about two minutes. Wipe off the wax residue with a clean cotton pad.

Cleaning waxed surfaces – vinegar dissolves the wax, and should not be used to clean waxed furniture. However, vinegar is a reliable option for removing an old coat of wax from a surface. To clean waxed surfaces, a wax cleaning solvent should be used instead.

Here’s what to do: Boil of pot of water—enough water to completely submerge the candlestick—then after turning off the burner, place the candlestick into the pot. As the water gradually cools, the wax slides off the metal.

Goo Gone works particularly well on fabrics with candle wax on them. Be sure you remove all the excess wax you can before you use the Goo Gone™. Follow the directions on the label. Scrape the Wax.

Many online forums recommend using an isopropyl alcohol (IPA) wipe-down to remove wax. Wax is an oily, slick substance, so it should be removed with a degreaser. Yes, isopropyl alcohol has some degreasing and cleaning properties, but a degreaser is a more complete option.

While not sold or marketed as a vehicle cleaner, I’ve found plain Dawn dish soap works great for removing car wax. It’s easier to find than most dedicated wax removers, relatively cheap and packs just the right amount of grease and wax cutting power to clean your car without harming the paint.

99% ISOPROPYL ALCOHOL is a general all-purpose industrial cleaner and degreaser. Removes dirt and grime quickly and efficiently. Dries quickly, leaving no residue.

Wax Removal Tips

Periodically, it is important to remove old car wax before reapplying a new coat. The previous wax could streak or the paint job may begin to look dull, both of which are signs that it is time to reapply.

A general rule is if your applying the same wax – just top it off if it hasn’t been there too long. You don’t need to clay & strip every time you apply another coat of wax – depending on how long it’s been since you did so. A different wax? Strip off the old wax with a paint cleaner at least.

Buff one coat off before applying a second extremely thin coat. Check the label to see how long one coat has to cure before applying another (usually 12-18 hours). Poly foam wax applicators are the best for achieving a thin, even coat. They’re absorbent, durable, washable, and reusable.

Washing your car will not remove wax if you’re using a car wash soap. Although, frequent washing could cause your wax to fade quicker than normal.

Washing Carefully

For example, washing the paint carefully using a pH balanced, non-detergent car wash soap using a clean, soft, high quality wash mitt that’s gentle to the touch and using both of these tools using expert technique will maximize how long a coat of wax will last.

Zwipes 12×16″ Microfiber Cloth

The Zwipes 12×16-inch microfiber cloths are among the best value products when it comes to car detailing. These conveniently sized cloths are extremely soft, and will not scratch the finish on your car’s paint or clear coat.

High-quality microfiber towels will not fall apart or scratch the surface of your vehicles like cheaper towels or chamois. Synthetic chamois are generally a better choice than leather chamois because they absorb more water.

Heat and microfiber towels do not mix well. Drying them on high heat ruins the polyester in the microfiber. This can cause scratches and other damages to the car paint when used. To skip the hassle of cleaning and deciding on microfiber towels, consider DetailXPerts to professionally detail your car.

Microfiber cloths can be machine-washed for convenience or if the fabric is excessively dirty or stained. Do not wash microfiber cleaning cloths with other types of fabric. Machine wash a load of microfiber cloths in cold or warm water. Do not use hot water.

Wash in warm or hot water with mild detergent. No fabric softeners – they clog the open spaces in the microfiber, making the fabric useless. Be careful what you wash with your microfiber. Avoid anything made with cotton because the microfiber will grab on to the lint.

Use a dedicated microfiber detergent like Microfiber Revitalizer or a dye free/perfume free liquid laundry soap – no powders or granulated. Set washer to a warm water setting. Some heat is required to break down waxes and polishes. Cold settings will not clean towels as effectively.