Where do I find my transmission ID number?
Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.
How do you tell the difference between a 727 and 904 transmission?
Get down on your knees or whatever on the passenger side and look at the side of the trans. A 904 has a STRAIGHT sided pan, the 727 has a big bulge towards the front of the side of the pan.
Where is the transmission serial number on a?
Transmission serial numbers can be found on the Transmission data plate. The serial number of an Allison transmission may be located on the transmission data plate. This can be located on the side of the transmission.
How do I identify a Dodge transmission?
Transmission identification numbers are stamped on the driver side of the case flange just above the oil pan gasket (just below the TV lever). There will be a 9 digit part number, a space, a 4 digit build date, a space, and a 4 digit serial number. 6 = strength of trans. (1-9, higher number, stronger trans.)
How do I identify a Chrysler 727 transmission?
An A-727 can also be identified as being a 1978 and newer lockup units just by examining the transmission’s input shaft. It was built with a lockup if the shaft is smooth at its last half inch, on the contrary, if it is splined to the end of the input shaft, then it is a non-lockup transmission.
Are all 727 transmissions the same?
Much of what helped make the Chrysler 727 so strong had to do with its simple design. All versions featured the same gear ratios: 2.54:1 (1st), 1.45:1 (2nd), 1.01 (3rd) and 2.21:1 (reverse), along with two transmission bands.
How do you tell if you have a 47RE or an 47RH?
The easiest way to tell the difference is the plug where wires plug into trans coming from PCM. The RH has a 4 pin not quite flat like a trailer connector and the RE has a round 8 pin plug. The RH uses an external fluid temp sensor while the RE has a thermistor inside of the governer pressure sensor.
How can you tell 47RE from 48RE?
47RE has a different color pump. Pump is unpainted on the 47RE, and the 48RE have a black coating on them IIRC. Also the 48RE has a plastic ring on the reaction shaft support.
What vehicles have the 42RE transmission?
How Do I Order?
- 1989-2003 Dodge Dakota.
- 1998-2000 Dodge Durango.
- 1989-2001 Dodge Ram pickup 150 / 1500.
- 1989-2003 Dodge Ram Van B150 / B250.
- 1993-2004 Jeep Grand Cherokee.
- 1996-1998 Jeep Grand Cherokee 5.2 V8.
What does 47RH mean?
47RH: A hydraulically controlled four-speed automatic transmission found in ’94 to ’95 Dodge trucks. 47RE: An electronically controlled four-speed automatic transmission found in ’96 to ’02 Dodge trucks, as well as some ’03 models.
What year did the 47RE come out?
47RE Transmission Overview
It was invented in the mid-1990s and saw service until 2003. The 47RE is basically a 727 transmission with overdrive and some updated parts like steel gears instead of aluminum, as well as an increased number of clutch plates.
Does VIN number tell your transmission?
For many makes, the VIN is always enough information to determine transmission.
Are 5.2 and 5.9 transmission the same?
Any ’96 or newer 5.2 or 5.9 transmission will work. The 5.9 flexplate has balance weight on it. The 5.2 is internally balanced and has no weight on the plate. You can use a 5.9 flexplate on a 5.2, just remove the weight.
What is a 46RH transmission?
The 46RH transmission is a 4 speed automatic that comes out of the A518 family. It replaced the A727 and was preceded by the 46RE transmission starting on all 1996 models. The biggest improvement over the 727 was that it featured in overdrive.
How do I know what transmission My car has?
Another way is to crawl under the vehicle and look for part numbers. Using a good flashlight, look for part numbers stamped into the transmission pan or the transmission itself. Your local auto part store or dealer will be able to cross-reference the numbers to determine the kind of transmission the part belongs to.
How do I tell if I have a CVT transmission?
The best way to identify a CVT transmission in your vehicle is to look for the manufactures logos indicating one, such as Toyota’s Synergy Drive, Honda’s Multi Matic and Nissan’s Xtronic.
Do transmissions have serial numbers?
You could also find the serial number that is usually stamped on the transmission and note it down. You can then compare the serial number with that of the different transmission types that you are sure of. In this way, you should be able to realize the type of transmission of your vehicle.
How many types of transmission are there?
Three Types of Transmissions: Manual, Automatic, and CVT.
How do I identify a 4l60e transmission?
What transmission Do I have E90?
BMW 3 Series (E90)
| BMW 3 Series (E90/E91/E92/E93) | |
|---|---|
| Transmission | 6-speed manual6-speed ZF 6HP automatic7-speed dual-clutch |
| Dimensions | |
| Wheelbase | 2,760 mm (108.7 in) |
| Length | 4,520–4,610 mm (178.0–181.5 in) |