Can you use ipe oil on cedar

IPE Oil Wood Stain Review

Ipe Oil™ Deck Finish is a 250 VOC compliant oil-based finish that can be used in all 50 states. Exotic hardwoods such as IPE are extremely dense and difficult to penetrate. These wood types when stained will always fade faster than other woods such as Cedar, Redwood, and Pine.

It protects and conditions the wood while maintaining a completely natural appearance. Ipe Oil^® Hardwood Deck Finish may be used on exterior hardwood to enhance the wood’s natural beauty with exceptional results on Ipe, Tigerwood, Cumaru and other exotic hardwoods.

Ipe Oil^® and Ipe Oil^® Plus™ are both oil-based hardwood semi-transparent stains exclusively formulated to dry properly on Ipe, Mahogany, Cumaru and also many other oily exotic lumber that trigger finish drying troubles.

Though Ipe wood is highly resistant to mold and fungus because of its dense make up, if the ends aren’t sealed, that can be the easiest place for it to enter. … They may be great for boats that have teak wood and such, but not so much for your deck.

If you want your IPE decking to remain naturally brown, you should apply a layer of IPE oil every year. Otherwise, you can just leave it as it is and ensure that you clean it regularly. The best part about not using IPE oil on a wood decking is that the silver patina is not permanent.

If you are oiling your Ipe deck to maintain its color and protect it from UV fading, we recommend that you oil your deck annually. However, if you live somewhere where the wood is exposed to a lot of direct sunlight, you might want to do this more often.

As nouns the difference between ironwood and ipe

is that ironwood is (countable) any of a number of tree species known for having a particularly solid wood while ipe is a type of wood of the genus tabebuia , similar to teak, used for outdoor decking and furniture.

Ipe is just too dense and oily to make a good substrate for film-forming finishes, and even has a hard time accepting penetrating oils. Even so, a good penetrating oil with a high trans-oxide pigment content is our preferred ipe finish; we’ve had the best luck with Penofin’s Marine Oil.

For dense and oily woods (e.g. exotics like Ipe or mahogany) a thinning ratio of 3:1 (solvent to Tung oil) will help with penetration. The Tung oil should soak into the wood surface and not leave a thick liquid coat on top of the wood.

Does Ipe need to be sealed? Ipe does not need any “sealer” in fact the wood is dense, that it doesn’t really take sealer anyways. The products used on Ipe are not really sealers as much as UV protectants. It is the sunlight that turns Ipe grey, and using these products can help protect against that.

Teak and Ipe are attractive and durable woods that lend themselves to the fabrication of high quality and long-lasting outdoor furniture. Teak has been traditionally grown in Asia, while Ipe grows in Central America and South America. … Teak is a long-prized hardwood used to make both indoor and outdoor furnishings.

Cabot ATO has a unique blend of oils formulated for Exotic Hardwoods such as IPE(pronounced epay) Mahogany, Brazilian Redwood, Massaranduba, Meranti, Pau Lupe, and Teak.. Linseed, Tung, and alkyds mixed with trans-oxide pigments make this the most impervious coating against UV damage.

Ipe is over 3 times harder than Teak and if you leave Ipe untreated it will turn a beautiful silver grey. When Ipe turns grey it still shows the beautiful wood grain and maintains all of its durability and will still last up to 75 years or more.

In order to obtain an keep a great looking deck, we recommend annual maintenance. For even better results you can apply maintenance twice: once in the spring and once just before fall. This will ensure a faster project and easier preparation, since you don’t let the wood go too grey.

Ipe wood has natural slip resistance.

Ipe is the only hardwood species that meets the ADA requirements for slip resistance in a wet environment, naturally. Without any additives. This is especially important in an area that constantly gets wet, like an Ipe dock, float, marina or pier. Who wants to slip or fall?

Ipe decks should be regularly kept clean of dirt and debris. Sweep leaves off the deck, don’t let rusting items sit on the wood, and hose off mud or spills. You can use a hose to safely clean off your deck but be careful when using a power washer.

An experienced ipe deck builder told me to not sand ipe as you remove the layers of deceased cells which absorb the sealer. That was why it turned grey in about 4-5 months. Also, lay the boards end grain curving downward to drain better and avoid “cupping” after rain.

Your initial cost for ipe decking materials will most likely be higher than those of Trex products. This is in part because it is imported from Central and South America. Also there is only so much ipe in the world.

For dense hardwoods like Ipe and Cumaru, we recommend the following: Use 80 grit sand paper. … Set on top of the hardwood. Following the grain of the wood, gently glide the sander over the surface.

Wash your Ipe wood surfaces with a nylon bristle brush or soft towel and Penofin^® Pro-Tech Wood Cleaner to remove surface dirt, scrubbing in the same directions as the grain of the wood, then rinse off with water. Once complete allow to dry. In a pinch, you may use mild dish soap, then rinse clean with water.

Linseed oil is inexpensive and is available at any hardware store. Simply wipe linseed oil on your Ipe furniture with a rag, and wipe off any excess after 30 minutes. Even better than linseed oil is a UV-resistant penetrating oil called Penofin Exotic Hardwood Finish.